<VV> 60-62 Road draft tube mount and seal

[tkalp at cox.net]

I attached a couple of photos to show the differences.  In the first photo of the ends of the pipes the top pipe is a PCV style and the bottom pipe is from my Greenbrier, along with the broken "gasket" and the clamp.  There is a lot of difference in the height and shape of the bead on the end.

The second photo is the different holes the pipes fit in  The top topcover is from the PCV style and has a chamfer where the lower cover is from the Greenbrier and has a square edge on the hole.

The "bump" on the Greenbrier road draft tube goes completely into the hole in the top cover.   Hope the photos help explain the problem.

Terry Kalp
Wichita, KS

---- Harry Yarnell <hyarnell1 at earthlink.net> wrote: 
> I thought it was an O ring.
> 
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Aweb-ends.jpg
Type: image/pjpeg
Size: 96000 bytes
Desc: not available
Url : http://www.vv.corvair.org/pipermail/virtualvairs/attachments/20110214/260405fd/attachment.bin 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Aweb-holes.jpg
Type: image/pjpeg
Size: 76267 bytes
Desc: not available
Url : http://www.vv.corvair.org/pipermail/virtualvairs/attachments/20110214/260405fd/attachment-0001.bin