<VV> Electric Fuel Pump

[J R Read]

Hey,

Good tip.  Thanks.
Later, JR


----- Original Message ----- 
From: "Daniel Monasterio" <dmonasterio at hotmail.com>
To: <gojoe283 at yahoo.com>; <dixon5553 at yahoo.com>
Cc: "VirtualVairs" <virtualvairs at corvair.org>
Sent: Tuesday, December 27, 2011 9:41 AM
Subject: Re: <VV> Electric Fuel Pump


>
>
>
>> Date: Tue, 27 Dec 2011 04:28:26 -0800
>> From: gojoe283 at yahoo.com
>> To: dixon5553 at yahoo.com
>> CC: virtualvairs at corvair.org
>> Subject: <VV> Electric Fuel Pump
>> << I installed the pump with gas in the tank. It's messy, you'll get gas 
>> splashed on you when you are disconnecting the tank hose and installing 
>> the pump, but it can be done. >>
> If you first disconnect the inlet pipe from the mechanic pump and blow air 
> (mouth is good enough) back to the tank, till you hear air bubbling in the 
> tank, you will break the siphon around the tank thus, avoiding gas 
> spillage when disconnecting the outlet tank hose.
> Daniel Monasterio
>>