<VV> FW: corvair carborator's
J R Read
hmlinc at sbcglobal.net
Tue Aug 30 20:30:12 EDT 2011
Consider yourself fortunate to have alcohol free gas available. IL is a
corn growing state and we've had alcohol in our gas for at least 15 years.
The only other suggestion I can offer (assuming the pump cups were new and
NOT NOS) - and which you may not want to hear - is improper installation.
They ARE a little tricky to install properly.
I wish you success in solving the problem. When you find the solution,
please be good enough to let us know what the answer turns out to be.
But, I'm a bit confused. Was it Ron or Greg who had the initial question?
Later, JR
----- Original Message -----
From: "Ron" <ronh at owt.com>
To: "J R Read" <hmlinc at sbcglobal.net>; "Dennis Pleau"
<dpleau at wavecable.com>; <virtualvairs at corvair.org>
Cc: "'Greg Feminella'" <erasmus_dsob at yahoo.com>
Sent: Tuesday, August 30, 2011 6:49 PM
Subject: Re: <VV> FW: corvair carborator's
> Here in Washington there are some ethanol free gas stations scattered
> around and that's what I go to.
> RonH
>
> ----- Original Message -----
> From: "J R Read" <hmlinc at sbcglobal.net>
> To: "Dennis Pleau" <dpleau at wavecable.com>; <virtualvairs at corvair.org>
> Cc: "'Greg Feminella'" <erasmus_dsob at yahoo.com>
> Sent: Tuesday, August 30, 2011 4:34 PM
> Subject: Re: <VV> FW: corvair carborator's
>
>
>> You bought old stock rubber that was already partially deteriorated OR
>> there
>> IS ethanol in your gasoline?
>>
>> You said - 3 times - but you did not say over what time period. Those of
>> us
>> in ethanol states (most now) are changing accelerator pump cups (new
>> rubber)
>> every 2 to 3 years.
>>
>> Later, JR
>>
>>
>> ----- Original Message -----
>> From: "Dennis Pleau" <dpleau at wavecable.com>
>> To: <virtualvairs at corvair.org>
>> Cc: "'Greg Feminella'" <erasmus_dsob at yahoo.com>
>> Sent: Tuesday, August 30, 2011 6:01 PM
>> Subject: <VV> FW: corvair carborator's
>>
>>
>>> Forwarding to the VVs
>>>
>>>
>>>
>>> From: mailman-bounces at www.vv.corvair.org
>>> [mailto:mailman-bounces at www.vv.corvair.org] On Behalf Of Greg Feminella
>>> Sent: Tuesday, August 30, 2011 3:57 PM
>>> To: virtualvairs-owner at corvair.org
>>> Subject: corvair carborator's
>>>
>>>
>>>
>>> Having trouble with accelorator pump's changed them three time's with
>>> sorenson rebuild kit's i now orded ecklar pump's . I had the tank
>>> cleaned
>>> and lined and use only non ethenol now what happen's is the rubber
>>> either
>>> rot's away or the cup fold's back if you have any suggestion's please
>>> reply
>>>
>>>
>>> Thank you G. FEMINELLA
More information about the VirtualVairs
mailing list