<VV> coil voltage (stock)

[Ramon Rodriguez III]

Hiya guys,

     Today the 63' started acting up again (stumbling and quit once) and I'm
beginning to suspect that the coil is getting cooked.  I checked voltage
going into the coil with the engine at idle and at about 2k RPM.  I got 10.4
at idle and 11.1 at 2,000RPM... Do I remember correctly that it should be
much lower?  If I recall it should be 7 volts or so?   Assuming this is
higher than it should be I'll just run a new wire from the firewall and put
a new resistor in, I might even have one laying around if I can find it.

Thanks

-- 
Ray "Grymm" Rodriguez
Lake Ariel, PA