<VV> 140 Throttle Linkage for Ramon Rodrigues
James Bennetts
jamesbenn1441 at yahoo.com
Fri Apr 22 09:31:33 EDT 2011
I had a 140/4 that also would not get full open throttle. I adjusted the linkage
several times and checked all the pieces parts and still could not find the
problem. Everything looked OK when I did it by hand back at the carbs I could
get full throttle but not by the gas pedal. I then discovered that the gas pedal
was loose on the pivot shaft. It would open the throttle until it hit the
secondary carbs and then the increased load would cause the pedal to rotate on
the shaft with no additional throttle linkage movement. I took off the pedal and
all the little splines had worn off. I got a new pedal from Clarks and that
fixed the problem.
Jim Bennetts
Akron, OH
More information about the VirtualVairs
mailing list