<VV> start solenoid

[Harry Smith]

You can jump it out of the car. Hook jumper cables, negative to the starter
or solenoid body and positive to the large center terminal on the solenoid.
Keep your foot on it or clamp it in a vise because it will move! Use a
screwdriver to jump the terminal on the solenoid.
Harry Smith
1963 Rampside
Coral Springs, FL

On Tue, Apr 19, 2011 at 4:24 PM, Ramon Rodriguez III <corvairgrymm at gmail.com
> wrote:

> Let's do it this way.  How can I test the solenoid for proper operation
> (with it off the starter in my hand)?  If the solenoid is working correctly
> than the starter must have hung up and not allowed the solenoid to pull
> back
> until I disconnected the battery, which makes sense.  Strange thing is the
> same starter was working fine before I pulled it out, maybe just bad luck
> when I put it in?  Right now the starter is out of the car.
>
> I'd just like to test the solenoid before I put it back in.
>
> Ray R.
>   _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are
> the property
> of the writer, please attribute properly. For help, mailto:
> vv-help at corvair.org
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options:
> http://www.vv.corvair.org/mailman/options/virtualvairs
>  _______________________________________________
>



-- 
"THERE IS NO TRY,
THERE IS ONLY DO
OR DO NOT"