<VV> GM 1965 Manual Section 6 - carbs -

[Charles Lee]

JR,

I have the carbs off and did the idle adjust screw, 1-1/2 turns out from 
set, and the throttle adjust (with the paper + 1-1/2 turns in).

Now, how do I find the jet size ?

I just want to get it running again, which it was beforfe I took them off, 
just too odoriforous for my olfactories.

Anything else I can do while I have the carbs off ?
www.yourbuyersinn.com/Cars/Corvair/1967MonzaCarburetors.htm

I asked Bob Helt how to get his book on rebuilding/identifying Corvair 
Rochester carbs, for future reference, if I need to go deeper.

Thanks,
Charlie





To: "Charles Lee" <Chaz at ProperProper.com>; "Jack Kean" <jkean at sbcglobal.net>
Cc: <virtualvairs at corvair.org>
Sent: Tuesday, September 21, 2010 8:23 PM
Subject: Re: <VV> GM 1965 Manual Section 6 - carbs -


> Chas,
> But since you have the carbs off, you might want to take a look inside and 
> see what size jets are there.  Unless you KNOW otherwise, don't assume 
> that they are the same.
>
> Later, JR
>