<VV> now EM cable
Tom Berg
thesuperscribe at yahoo.com
Fri Sep 17 15:06:43 EDT 2010
I'll bet your conversion will go better than the 3-speed to 4-speed change done
on our '64. The guy who did the work retained much of the shifting mechanism
from the 3, and it took a while to get it working right with the 4.
Powerglide has some advantages, of course, but is b-o-r-ing to drive. Is that
why you're going to a 4-speed?
--TB
________________________________
From: Chris & Bill Strickland <lechevrier at earthlink.net>
To: virtualvairs at corvair.org
Sent: Fri, September 17, 2010 1:34:33 PM
Subject: Re: <VV> now EM cable
>superior Early model. Now there's a subject that needs more airing on this site,
>ha ha. -- Tom Berg
>
Careful what you wish for Tom -- I'm starting a PG to 4-speed swap into
a 61, and although I have done several of these over the years, I am
remembering that I don't remember everything that I did to do it, so I
'might' have to ask about the clutch cable routing ... Yes, I have the
correct pedal assembly. I think I am still missing a pulley or two.
Bill Strickland -- serious post about Chaz's problem is next.
_______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are the
property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
_______________________________________________
More information about the VirtualVairs
mailing list