<VV> Help - Oil Out Dipstick Tube

[Jay Pitchford]

Shaun - it's a brand-new rebuild. New everything ... pistons, jugs, rings.

On Thu, Sep 2, 2010 at 6:11 PM, Shaun <shaun_mcgarvey at shaw.ca> wrote:

> Short of a rebuild, the "proper" way to deal with this problem is to install
> breathers in the valve covers. The way it's "usually" dealt with is to drill
> a hole in the oil cap or filler tube and run a hose through a hole in the
> shrouds.
> The reason it does it in the first place is because of poor cylinder
> sealing, either worn rings or cylinder walls or both.  A rebuild would solve
> it, but you can drive it a loooong time like that if you add a breather.
> Keep your revs down in the meantime.
>
> yea, Vairily ... Shaun