<VV> Torque wrench to get nuts?
Sethracer at aol.com
Sethracer at aol.com
Wed Oct 20 16:36:09 EDT 2010
In a message dated 10/20/2010 1:30:13 P.M. Pacific Daylight Time,
patiomatt at aol.com writes:
Do I need a 1/2" drive breaker bar to remove those connecting rods ? The
socket
has to be pretty strong, but needs to be very 'thin-walled' to fit in
there, it
seems ?
==========================================================
Book calls for 22-29 FT. LB.
1/4" drive INCH POUND torque wrench at 300-320 will be fine and fits
nicely!
Matt Nall
You won't need a torque wrench to remove the nuts - Only to reinstall them!
Use a 3/8' breaker bar with a 12 point socket. That should easily clear
about anything for removal. You will need a smaller (1/4" size) for
installation.
Seth Emerson
C's the Day! - Corvair, Camaro, Corvette
San Jose, CA
More information about the VirtualVairs
mailing list