<VV> big bolts heads are a boon to A/C cars.

[John O'Shea]

Please explain what rework is required on "big bolt" heads for an A/C car?

Seems Corvairs using modern (and featherweight) A/C compressors have no 
problem with
"small bolt" heads.  Maybe not so for folks using those ancient 500 pound GM 
compressors.

Jack in Las Vegas


----- Original Message ----- 
From: <N2VZD at aol.com>
To: <virtualvairs at corvair.org>
Sent: Thursday, October 14, 2010 6:33 PM
Subject: Re: <VV> big bolts heads are a boon to A/C cars.


>i had a set of big bolt (3/8) heads reworked for my A/C car. now the
> compressor bracket has a better chance of not pulling bolts out of the 
> head...it
> now looks much stronger. the 1/4 inch bolts in the other heads were
> stripped out  under the compressor bracket.
> regards, tim colson
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
>