<VV> 1966 trans on a earlier diff

[Tony Underwood]

At 07:45 AM 10/2/2010, Clark Hartzel wrote:
>There are other problems in doing this.  The bolt that retains the bearing
>adjusters on the diff and trans are in a different position so the heads
>interfere with the castings.  I recall having to grind clearance on one or
>both castings to make it work.
>Also the '66-69 trans is longer than an early so you have to use the later
>trans mount and change the shifter to shorten it up.




No need to change the shifter.  The shift coupler can be 
adjusted.   Done this on my '65 ragtop w/Sag gearbox.


If adjustment was what you meant rather than changing something, 
forget I said anything.




tony..