<VV> Rube Goldberg would be proud ;>}) !!!!

[Ron]

What you're really doing is making work where none existed before in order 
to keep from ever finishing enything.  Or so it seems.
RonH

----- Original Message ----- 
From: "Charles Lee" <Chaz at ProperProper.com>
To: <virtualvairs at corvair.org>; "Matt Nall" <patiomatt at aol.com>
Sent: Sunday, November 21, 2010 9:49 PM
Subject: Re: <VV> Rube Goldberg would be proud ;>}) !!!!


> OK, it may not be clear, but it is not my desire to not be driving my
> Corvair; it is just working out that way.
> The web pages are my "breaks" from working on the Corvair, when I can plan
> my strategy for the next bout with her.
>
> I've all but given up on actually driving this thing, so I have opted to
> enjoy repairing it ;>}) !
>
> Honestly, each and every thing I've done so far has turned into yet 
> another
> job (this started as a tune-up to fine-tune the slight miss back in May.)
> So far, I haven't caused any of the problems myself, at least I hope not,
> but want to be sure of what I do, so I don't delay this project any 
> further
> than it has already been !
>
> At each and every point in this "journey" I really thought that I was
> "almost there" until it blossomed into yet another, deeper repair.
>
> So, I have decided to enjoy repairing, and learning about the car, since 
> it
> is clear I may never actually drive it.
>
> I enjoyed watch your video although I may never experience it, but it is 
> an
> incentive !
>
> I found some tapered ring compressors but Jegs only has larger sizes :
> 4.030", 4.000", 4.040", 4.060", 4.155", 4.250", 4.125", 4.280", 4.310"
>
> Do you have another source ?
>
> Charlie
>
>
> ----- Original Message ----- 
> From: "Matt Nall" <patiomatt at aol.com>
> To: <virtualvairs at corvair.org>
> Sent: Sunday, November 21, 2010 5:32 PM
> Subject: Re: <VV> Rube Goldberg would be proud ;>}) !!!!
>
>
>> -----Original Message-----
>> From: Charles Lee <Chaz at ProperProper.com>
>> To: John O'Shea <jco99 at cox.net>
>> Cc: Virtual Vairs <virtualvairs at corvair.org>
>>
>>
>>
>> My reputation is beyond repair, but maybe I can save Rube's from utter
>> demise if I don't give up, or get derailed !
>>
>> ~Cz
>>
>> ========================================================
>>
>>
>> As we ALL  can see!!
>>
>>
>> You "CC"  VV????   Are we that far down on your list?   LOL!
>>
>>
>> And  to many here it appears you don't want to ever "Drive"  your Vair...
>> just  wrench on it and make webpages!!!
>>
>>
>> I just left SoCal.....beautiful DRIVING  weather....
>>
>>
>> I wouldn't   say a word...but you are just repairing a car... not doing a
>> "full on  Rotisserie  restoration"...
>>
>>
>> Times's a wasting!  GG   Here's what driving one is like....
>>
>>
>> http://www.youtube.com/watch?v=nh8Rw1-QbfM
>>
>>
>> Matt Nall
>> Charleston, Oregon
>> http://mysite.ncnetwork.net/reswr0kp/
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> _______________________________________________
>> This message was sent by the VirtualVairs mailing list, all copyrights 
>> are
>> the property
>> of the writer, please attribute properly. For help,
>> mailto:vv-help at corvair.org
>> This list sponsored by the Corvair Society of America,
>> http://www.corvair.org/
>> Post messages to: VirtualVairs at corvair.org
>> Change your options:
>> http://www.vv.corvair.org/mailman/options/virtualvairs
>> _______________________________________________
>>
>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________