<VV> front cross member

Ken Clark kcvair at hotmail.com
Wed Mar 10 15:46:28 EST 2010


thanks, we'll try that and let you know how that works out.  Ken
 
> From: bryan at skiblack.com
> Date: Wed, 10 Mar 2010 14:30:02 -0500
> To: virtualvairs at corvair.org
> Subject: Re: <VV> front cross member
> 
> I have done this as well, even on some fairly rusty cars. Some patience goes a long way, I still use penetrant and work the bolt back and forth. It's much easier with an impact gun, tho.
> 
> --Bryan
> 
> On Mar 10, 2010, at 2:13 PM, Tom Hughes wrote:
> 
> > I have found my 3/8ths drive impact wrench works great for getting the bolts
> > out. The hammering action seems to loosen rust's hold on the thread without
> > torquing off the bolt head or damaging the cage nut.
> 
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are the property
> of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
> _______________________________________________
 		 	   		  
_________________________________________________________________
Hotmail: Free, trusted and rich email service.
http://clk.atdmt.com/GBL/go/201469228/direct/01/


More information about the VirtualVairs mailing list