<VV> DISTRIB FAILURE

[N2VZD at aol.com]

i am betting it was a word issue...or a special dale unit from a few years  
ago.
 
 
In a message dated 3/9/2010 10:19:00 A.M. Eastern Standard Time,  
frankcb at aol.com writes:

If you have a "vacuum/pressure pot" then it's not  a stock Corvair part.  
The stock Corvair units were EITHER vacuum OR  pressure, but not both.  The 
PRESSURE pots were used on the turbo  Corvairs while all others used the 
VACUUM pots.
     Frank  Burkhard
 
In a message dated 03/09/10 02:25:05 Eastern Standard Time,  
dougmackintosh at yahoo.com writes:

I'm going to salvage the vacuum/pressure pot