<VV> Engine reinstall

Matt Nall patiomatt at aol.com
Wed Jun 16 13:48:17 EDT 2010




We will test it to make 
ure it works.  
ow much time does it take to install O rings?  Any other seals or gaskets that 
hould be done? 
erry Braga

============================================


  By all means run the engine on the floor  for at least 30 minutes to get it warmed up... then you will see if there are any leaks.

Everything you can do take 1/2 the time it does when the engine is in the car!  If you have an engine stand to put it on to work on it.

http://www.youtube.com/watch?v=ChydcjnFRDw


Matt Nall
Charleston, Oregon
http://mysite.verizon.net/nalllm



-----Original Message-----
From: gbraga at aol.com
To: virtualvairs at corvair.org
Sent: Wed, Jun 16, 2010 12:18 pm
Subject: <VV> Engine reinstall




i,
k, the engine is out of the car, I bought in from a reputable supplier, and it 
as working when pulled from the doner.  
hat would you suggest be done before it is installed?  We will test it to make 
ure it works.  
ow much time does it take to install O rings?  Any other seals or gaskets that 
hould be done? 
erry Braga
4 Convert
2 Rampside

 _______________________________________________
his message was sent by the VirtualVairs mailing list, all copyrights are the 
roperty
f the writer, please attribute properly. For help, mailto:vv-help at corvair.org
his list sponsored by the Corvair Society of America, http://www.corvair.org/
ost messages to: VirtualVairs at corvair.org
hange your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
_______________________________________________



More information about the VirtualVairs mailing list