<VV> Setting the timing

[Ron]

I keep several old golf tees around for that duty.
RonH

----- Original Message ----- 
From: "Dennis Pleau" <dpleau at wavecable.com>
To: "'Mark Durham'" <62vair at gmail.com>; "'Louis Armer'" 
<carmerjr at mindspring.com>
Cc: <virtualvairs at corvair.org>; "'Stephen Upham'" <contactsmu at sbcglobal.net>
Sent: Tuesday, June 01, 2010 6:41 PM
Subject: Re: <VV> Setting the timing


> #1 phillips screwdriver works well for plugging the line.
>
> dp
>
> -----Original Message-----
> From: virtualvairs-bounces at corvair.org
> [mailto:virtualvairs-bounces at corvair.org] On Behalf Of Mark Durham
> Sent: Tuesday, June 01, 2010 6:34 PM
> To: Louis Armer
> Cc: virtualvairs at corvair.org; Stephen Upham
> Subject: Re: <VV> Setting the timing
>
> Stephen, the point is to remove vacuum from the distributer and cap the 
> leak
> to the carb, so it is best to pull the hose from the distributer and plug
> it.
>
> Mark Durham
>
>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________