<VV> 1967 Corvair Monza fuel pump
Ron
ronh at owt.com
Sat Jul 24 15:25:50 EDT 2010
I'm presently running three Corvairs, all with mechanical fuel pumps, and
have never had one leak fuel into the oil. What's the problem?
RonH
----- Original Message -----
From: "shortle" <shortle556 at earthlink.net>
To: <jvhroberts at aol.com>; <tony.underwood at cox.net>;
<virtualvairs at corvair.org>
Sent: Saturday, July 24, 2010 11:45 AM
Subject: Re: <VV> 1967 Corvair Monza fuel pump
> And electric fuel pumps will NOT fill your crankcase with gasoline.
> Timothy Shortle in Durango Colorado
> Experienced in the early '80s with a very full crankcase of oil + gas
>
>
> -----Original Message-----
>>From: jvhroberts at aol.com
>>Sent: Jul 24, 2010 12:02 PM
>>To: tony.underwood at cox.net, virtualvairs at corvair.org
>>Subject: Re: <VV> 1967 Corvair Monza fuel pump
>>
>>
>>
>>
>> Late fuel pumps are better than early fuel pumps!!
>>
>>John Roberts
>>
>>
>>
>>
>>-----Original Message-----
>>From: Tony Underwood <tony.underwood at cox.net>
>>To: virtualvairs at corvair.org
>>Sent: Sat, Jul 24, 2010 10:18 am
>>Subject: Re: <VV> 1967 Corvair Monza fuel pump
>>
>>
>>At 08:39 PM 7/23/2010, Charles Lee wrote:
>>
>>>I know this is the right pump, since it was running fine, before
>>
>>>sitting a while.
>>
>>>
>>
>>>Now, runs OK and it leaks a bit but the seals and surfaces look fine
>>
>>>- not cracked, pinched or anything.
>>
>>>
>>
>>>It would seem that the seals could be replaced for less than $70 to
>>
>>>buy everything else as a package
>>
>>
>>
>>
>>
>>
>>
>>I bought a couple of fuel pump rebuild kits about 20 years ago at a
>>
>>show, paid 13 bucks each for them iirc. Last time I ever saw a
>>
>>rebuild kit for a 'Vair pump.
>>
>>
>>
>>Since then I've overhauled several myself by making gaskets and
>>
>>reworking the valve block, either replacing bad valves, depending on
>>
>>the pump or replacing the whole block itself. I rescued several
>>
>>valve blocks from bogus pumps I ran across... gaskets and diaphragms
>>
>>were of course useless but the valve blocks were fine.
>>
>>
>>
>>I have another bogus pump behind me as I speak that's likely gonna
>>
>>get overhauled with the correct stuff as well. It's never been used
>>
>>and its gaskets are cracking just from sitting on the shelf.
>>
>>
>>
>>
>>
>>tony..
>>
>> _______________________________________________
>>
>>This message was sent by the VirtualVairs mailing list, all copyrights are
>>the
>>
>>property
>>
>>of the writer, please attribute properly. For help,
>>mailto:vv-help at corvair.org
>>
>>This list sponsored by the Corvair Society of America,
>>http://www.corvair.org/
>>
>>Post messages to: VirtualVairs at corvair.org
>>
>>Change your options:
>>http://www.vv.corvair.org/mailman/options/virtualvairs
>>
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>>This message was sent by the VirtualVairs mailing list, all copyrights are
>>the property
>>of the writer, please attribute properly. For help,
>>mailto:vv-help at corvair.org
>>This list sponsored by the Corvair Society of America,
>>http://www.corvair.org/
>>Post messages to: VirtualVairs at corvair.org
>>Change your options:
>>http://www.vv.corvair.org/mailman/options/virtualvairs
>> _______________________________________________
>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are
> the property
> of the writer, please attribute properly. For help,
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options:
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
More information about the VirtualVairs
mailing list