<VV> 1967 Corvair Monza fuel pump

[jimster1]

Electric fuel pumps fit all years and models.
Jim

-----Original Message-----
From: virtualvairs-bounces at corvair.org
[mailto:virtualvairs-bounces at corvair.org] On Behalf Of Tony Underwood
Sent: Friday, July 23, 2010 8:19 PM
To: virtualvairs at corvair.org
Subject: Re: <VV> 1967 Corvair Monza fuel pump

At 08:11 PM 7/23/2010, Bryan Blackwell wrote:

>No, I recall there are at least two different push rod 
>lengths.  This likely contributed to the past problems.  As long as 
>you have a rod and pump that match, I'm pretty sure the set goes 
>into any Corvair engine, tho.  You might take a look at the Clark's 
>catalog to see what's available, I believe they note the differences at
least.



A later pump fits an earlier engine if you swap the earlier pushrod 
for the later one, which allows a '62-up pump to work in a '60-'61 
engine without stretching the pump diaphragms which eventually will 
split and leak.   Just use the later pushrod with the later pump, no 
problems.



tony..   
 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are
the property
of the writer, please attribute properly. For help,
mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America,
http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
 _______________________________________________