<VV> parts cleaner

[Jay Pitchford]

Along the same lines, but finer straining ... if you have a high-end coffee
roaster/cafe close by, they will often have large paper filters used for
making large batches (5 gallon buckets) of toddy, which is concentrated
cold-brewed coffee. These make excellent filters for large volume liquid
straining.



On Sat, Jul 17, 2010 at 5:29 PM, John O'Shea <jco99 at cox.net> wrote:

> Wal-Mart paper filters for large coffee pots.
>
>
> ----- Original Message -----
> From: "Louis Armer" <carmerjr at mindspring.com>
> To: <virtualvairs at corvair.org>
> Sent: Saturday, July 17, 2010 2:20 PM
> Subject: <VV> parts cleaner
>
>
> >I have just emptied my parts cleaner of all the mineral spirits which
> > I have saved. I have cleaned all the trays, small parts baskets and
> > the inside of the parts cleaner. I have 10 gallons of MS which I am
> > going to reuse. I need to filter/strain the 10 gallons to remove as
> > much dirt as possible. I need suggestions on what to use for
> > filtering that won't cost to much and will filter fairly quickly.........
> > maybe 10-15 minutes per gallon.
> > Chuck Armer
> >
> >
> > CORSA Member
> > Corvanatics Member
> > Corvair Atlanta Director
> > 1965 Corsa Coupe
> > 1964 Greenbrier
> > http://darthvair.com
> > SECC Member
> > 1965 Corsa Autocross car 1/2 owner
> > http://www.wtbrt.com/
> >
> > _______________________________________________
> > This message was sent by the VirtualVairs mailing list, all copyrights
> are
> > the property
> > of the writer, please attribute properly. For help,
> > mailto:vv-help at corvair.org
> > This list sponsored by the Corvair Society of America,
> > http://www.corvair.org/
> > Post messages to: VirtualVairs at corvair.org
> > Change your options:
> > http://www.vv.corvair.org/mailman/options/virtualvairs
> > _______________________________________________
> >
>
>  _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are
> the property
> of the writer, please attribute properly. For help, mailto:
> vv-help at corvair.org
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options:
> http://www.vv.corvair.org/mailman/options/virtualvairs
>  _______________________________________________
>