<VV> Ball Joint Removal

[Harry Yarnell]

You pretty well answered your own question. Chiseling also works. 
Replacement joints usually come with bolts.

Harry Yarnell
Perryman Garage and Orphanage
hyarnell1 at earthlink.net
----- Original Message ----- 
From: "Byron Comp" <byron.comp at yahoo.com>
To: <virtualvairs at corvair.org>
Sent: Monday, July 05, 2010 9:02 AM
Subject: <VV> Ball Joint Removal




Since I'm a novice at restoring 'Vairs this may seem like a stupid question, 
but here goes. The upper ball joints on my '64 Monza CT seem to have been 
riveted in and the top of the rivets "peaned". Is this normal and what do I 
do to get them out so as to install new ones? It looks like I'll have to 
grind off the rivet head and then punch it out, leaving 4 holes into which I 
would insert bolts with the new joint. Will the upper ball joint from Clarks 
line up with the holes left where the rivets used to be?

Thanks in advance for your help.

Byron

Message: 5
Date: Fri, 2 Jul 2010 22:25:46 -0400
From: "Rick Norris" <ricknorris at suddenlink.net>
Subject: Re: <VV> Harbor Freight Tool
To: "Ron" <ronh at owt.com>, <virtualvairs at corvair.org>
Message-ID: <E1D55506CA3B4ADC8518680DAB8FDB50 at RICK>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original


I've had one for years and it does work. I use a BFH just because I like to
beat on things!

Rick Norris
#36 Sunoco Corvair
www.corvairalley.com

> Has anyone tried the Harbor Freight Ball Joint Service Kit? If it really
> works for removing and replacing ball joints without a BFH, it's a bargain
> for $40. Any comments?
>
> RonH
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are
> the property
> of the writer, please attribute properly. For help,
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options:
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
>



------------------------------

Message: 6
Date: Fri, 2 Jul 2010 22:27:58 -0400
From: "henry kaczmarek" <kaczmarek at charter.net>
Subject: <VV> Harbor Freight tool
To: "virtualvairs" <virtualvairs at corvair.org>
Message-ID: <78021B8A29774777B8B4876E8C75C73D at kaczmare605bvq>
Content-Type: text/plain; charset="iso-8859-1"

If I get a ball joint to remove, I use my floor jack, a rent from the FLAPS 
Ball joint fork and a Sears BFH. Hasn't failed in 20 years.

Hank



 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are 
the property
of the writer, please attribute properly. For help, 
mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, 
http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
 _______________________________________________