<VV> VV> Headlight Upgrade

[ray smith]

Your unidealistic answer is much appreciated Mark. 


RCS


Sent via BlackBerry by AT&T

-----Original Message-----
From: Mark Durham <62vair at gmail.com>
Sender: virtualvairs-bounces at corvair.org
Date: Mon, 23 Aug 2010 10:03:19 
To: <jvhroberts at aol.com>
Cc: <virtualvairs at corvair.org>; <dheath at vanceandhines.com>; <kovacsmj at sbcglobal.net>
Subject: Re: <VV> Headlight Upgrade

I bought my four drop in replacements at NAPA for about 8 bucks each.

They give twice the light of the old bulbs at a reasonable cost.
Mark Durham

On Mon, Aug 23, 2010 at 7:53 AM, <jvhroberts at aol.com> wrote:

>
>  Better than the original T3s? You bet. But not all halogen sealed beams
> are created equal. Let me do some digging as I have some contacts who are
> highly knowledgeable on this topic!
>
> Now, I can tell you right now, the Cibie E codes will WAY outperform even
> the best sealed beams, so, it's up to each of you how much is enough.
> Personally, there's no such as headlights that are too good.
>
>
>
> John Roberts
>
>
>
>
> -----Original Message-----
> From: Michael Kovacs <kovacsmj at sbcglobal.net>
> To: dheath at vanceandhines.com
> Cc: VV <virtualvairs at corvair.org>
> Sent: Mon, Aug 23, 2010 10:39 am
> Subject: Re: <VV> Headlight Upgrade
>
>
> Just go to your local FLAPS and purchase sealsd beam halogens. i've used
> them
>
> for years. no problems.
>
>  MIKE KOVACS
>
>
>
>
>
>
>
> ----- Original Message ----
>
> From: "dheath at vanceandhines.com" <dheath at vanceandhines.com>
>
> To: virtualvairs at corvair.org
>
> Sent: Sun, August 22, 2010 7:11:51 PM
>
> Subject: <VV> Headlight Upgrade
>
>
>
> I am wanting to upgrade the headlight brightness on a '65.  I am curious to
> know
>
>
>
> everyone's thoughts on this subject.  I would like to go to a halogen bulb;
> I
>
> see there are two types: one appears to be a drop-in replacement and the
> other
>
> has a 5.75" housing with replaceable bulbs, any experience with either?  I
> have
>
> always heard the wiring is suspect when going to these higher power lamps,
> and
>
> looking at the wiring, I would agree (16g looks a little small for the
> current
>
> required).  Any words of wisdom as for going to a relay setup supplying
> direct
>
> battery voltage?
>
>  _______________________________________________
>
> This message was sent by the VirtualVairs mailing list, all copyrights are
> the
>
> property
>
> of the writer, please attribute properly. For help, mailto:
> vv-help at corvair.org
>
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
>
> Post messages to: VirtualVairs at corvair.org
>
> Change your options:
> http://www.vv.corvair.org/mailman/options/virtualvairs
>
>  _______________________________________________
>
>
>
>  _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are
> the property
> of the writer, please attribute properly. For help, mailto:
> vv-help at corvair.org
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options:
> http://www.vv.corvair.org/mailman/options/virtualvairs
>  _______________________________________________
>
 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are the property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
 _______________________________________________