<VV> high performance oil pressures

[shortle]

Mark, So long as ALL your bearing clearances are within spec (rod,main,cam) there should be no need to run a high volume oil pump. I know in this group some will agree and some will not. 
Timothy Shortle in Durango Colorado


-----Original Message-----
>From: Markpowhatan at aol.com
>Sent: Apr 17, 2010 8:50 PM
>To: virtualvairs at corvair.org
>Subject: <VV> high performance oil pressures
>
>I read much about using high volume oil pumps vs. stock  pumps, but I am 
>wondering if using such would cause the oil  filter  bypass valve to open, and 
>not filtering all the oil.  Is this  scenario possible or is the pressure 
>still going to be equal on both sides of  the filter, keeping the valve from 
>needing to open?  I just thought about  this since I'm in the middle of 
>having a engine rebuilt. -- Newbie here  just curious...Mark  63 Spyder  in 
>Virginia
> _______________________________________________
>This message was sent by the VirtualVairs mailing list, all copyrights are the property
>of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
>This list sponsored by the Corvair Society of America, http://www.corvair.org/
>Post messages to: VirtualVairs at corvair.org
>Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
> _______________________________________________