<VV> Lowering LM Front End

[Rick Norris]

Again, be careful how much you cut the springs. Experience has taught me 
that it will settle beyond where you want it after driving it some. No 
amount of bouncing the front end in the shop will replicate actual driving.
Your Height May Vary

Rick Norris
#36 Sunoco Corvair
www.corvairalley.com

> If you put the HD springs in, it really won't be very much lower than
> the standard springs.  If you cut the standard springs, even with the
> added rate of one less coil they'll probably bottom.  Generally the
> best solution is to cut a pair of HD springs.
>
> --Bryan
>
> On Sep 19, 2009, at 1:23 PM, Jay Pitchford wrote:
>
>> What's the best way to accomplish this? Replace the springs with
>> Clark's
>> heavy duty springs? Find someone to remove, cut a coil out, and
>> replace the
>> stock springs?
>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
>