<VV> Fwd: 110 PG with rough idle and wanting to stall at stops

[Stephen Upham]

> I'm running an electric pump.  The lines in the engine bay are all  
> steel. The only rubber is at the tank and for a short distance  
> between the metal line near the front of the rear wheel and the  
> steel line coming through the fire wall.  All of the hoses (even  
> the tank one) have less than 7k on them.
>
> Stephen
>
>
> On Sep 20, 2009, at 12:40 AM, J R Read_HML wrote:
>
>> Did you replace the two rubber hoses in the main fuel line (one at  
>> each end) with modern ones?  Possibly one or both are beginning to  
>> disintegrate and putting junk in your carbs.  Did it feel as if it  
>> were running on only three cylinders at times?  That would be a  
>> real strong clue.
>>
>> Later, JR
>>
>> CCE CORSA CORVANANTICS SCG member
>> '61 Rampside Standard 4/110
>> '65 Monza Convertible 4/140
>> "Keep the Love Alive"
>>
>>
>>
>