<VV> 15x8 wheels

[Ray Rodriguez III]

I did a TON of research on the subject of 15x8's a year or two back, mostly 
by asking questions on here...   unfortunately I suffered a huge data loss 
last year and no longer have the info, but searching the archives should 
work I think.

As long as the backspacing is right I dont think they are much trouble.. 
there is a spot INSIDE the wheelwell you need to hammer a bit (at the bottom 
front of the wheel well), but the wheel arch/fender itself should be fine. 
Naturally, this all depends on the tires you choose as well.


Ray


----- Original Message ----- 
From: "Bryan Blackwell" <bryan at skiblack.com>
To: "Ray Rodriguez III" <grymm at echoes.net>
Cc: <virtualvairs at corvair.org>
Sent: Friday, September 11, 2009 10:39 PM
Subject: Re: <VV> the new 66' Corsa wheels


> Take some care with that size wheel - depending on tire size chances  are 
> good you'll need to do a little trimming of the fenders.
>
> --Bryan
>
> On Sep 11, 2009, at 6:22 PM, Ray Rodriguez III wrote:
>
>> If it suits your personal preferences 15x8's work great all the way 
>> around... many of the cars you see with 3rd gen camaro wheels are 
>> 15'x8's.   I'm putting a set of 15x8 corvette rallys all the way  around 
>> on my 65' when it finally gets finished in fact.
>