<VV> Lifter bore specs?

[Harry Yarnell]

What do you mean the lifters won't accept a lash adjustment? There's PLENTY 
of oil feed to the lifter bores; I would find it hard to imagine 'excessive' 
wear in a lifter bore; or what that would have to do with 'lash adjustment'.

Harry Yarnell
Perryman Garage and Orphanage
hyarnell1 at earthlink.net
----- Original Message ----- 
From: "Mark Aksamit" <mark at vintagecarcare.info>
To: <virtualvairs at corvair.org>
Sent: Tuesday, November 24, 2009 1:11 PM
Subject: <VV> Lifter bore specs?


> Is there a spec for the lifter bores? We have a vehicle in the shop that 
> has
> good oil pressure, new lifters and will not accept a valve lash 
> adjustment.
> My guess is the block is just plum wore out! Has anyone measured the bores
> to verify the I.D.
>
>
>
> Thanks!
>
>
>
> Mark Aksamit
>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
>