<VV> Removing PG Fluid

[Mark Durham]

That is the easiest, since they do not provide drain plugs and dropping the
pan is expensive! Mark Durham

On Tue, Nov 3, 2009 at 10:53 PM, Bill H. <gojoe283 at yahoo.com> wrote:

>                                        B"H
>
> I'd like to thank everyone for their advice on my PG reverse issue.  My
> next question...of course, I need to drain some of the fluid so I can add
> the oil that will lubricate the valve body.
>
> Would my Mity-Vac, connected to a long platic hose inserted into the tranny
> dipstick tube, work?
>
> Thanks again ppl!...Bill Hershkowitz 69 Monza #5056 110 PG
>
>
>
>  _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are
> the property
> of the writer, please attribute properly. For help, mailto:
> vv-help at corvair.org
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options:
> http://www.vv.corvair.org/mailman/options/virtualvairs
>  _______________________________________________
>