<VV> Rear Motor Mount Replacement

[Michael Kovacs]

Probably done this basic support a 100 times. I use a 2 foot long 2x4 and put it across the middle/rear of the oil  pan from right to left. Then raise the rear of the engine till the weight is off the engine mount. 

 The jack used should be of sufficient stability. 
 MIKE KOVACS 



________________________________

From: "eamsquared at comcast.net" <eamsquared at comcast.net>
To: VirtualVairs <virtualvairs at corvair.org>
Sent: Friday, May 22, 2009 7:37:18 AM
Subject: <VV> Rear Motor Mount Replacement

Erich Meyer 



I need to replace my rear engine mount and would appreciate some advise on the engine support location for this repair.