<VV> Origins of Fuel Injected Corvair motor

[John Bailey]

I have seen fuel injection in sedans, but have never seen fuel injection in 
an FC.  Has anybody done that?

John B.
'61 700 4-dr 80 HP PG
----- Original Message -----  
 > ----------------------------------------------------------------------
>
> Message: 1
> Date: Fri, 20 Mar 2009 20:27:41 -0400
> From: "John Gull" <johngull at bellsouth.net>
> Subject: <VV> Origins of Fuel Injected Corvair motor
> To: <virtualvairs at corvair.org>
> Message-ID: <001e01c9a9bb$d8e82200$1f01a8c0 at toshiba>
> Content-Type: text/plain; charset="us-ascii"
>
>
>
>                    While recently attending the Myrtle Beach Show I was
> able to see the Corvair Fuel Injected Motor by Rochester. It was quite a
> piece of Vair history! Would love to know more about the Fuelie.  Does
> anyone know more of when and where this project took place ? Was the 
> Fuelie
> used or ever Dyno tested? I took several pics if any one is 
> interested.Many
> thanks to all historians with any info.   Inquisitive John Gull in 
> Asheville
>
>
>
> ------------------------------
>
>
> Date: Sat, 21 Mar 2009 01:35:14 EDT
> From: BobHelt at aol.com
> Subject: Re: <VV> Origins of Fuel Injected Corvair motor
> To: johngull at bellsouth.net, virtualvairs at corvair.org
> Message-ID: <d41.3939eee9.36f5d692 at aol.com>
> Content-Type: text/plain; charset="US-ASCII"
>
>
> In a message dated 3/20/2009 5:28:00 P.M. US Mountain Standard Time,
> johngull at bellsouth.net writes:
>
> While  recently attending the Myrtle Beach Show I was
> able to see the Corvair Fuel  Injected Motor by Rochester. It was quite a
> piece of Vair history! Would  love to know more about the Fuelie.  Does
> anyone know more of when and  where this project took place ? Was the 
> Fuelie
> used or ever Dyno tested? I  took several pics if any one is 
> interested.Many
> thanks to all historians  with any info.   Inquisitive John Gull in 
> Asheville
>
>
>
> John, Info and some dyno test results in my book, CORVAIR SECRETS, 
> available
> from me and several vendors.
> Regards,
> Bob Helt