<VV> Fuel tank sender leaking?

[Tom Hughes]

Might be a good candidate for JB Weld. Clean the area really well and apply
per the instructions. Good luck.

On Fri, Jun 5, 2009 at 5:27 PM, Les <corvair at mts.net> wrote:

> A friend's '63 is dripping some fuel. Looks like it's coming from around
> the fuel line where it enters the tank - where the pipe goes into the
> sending unit. The pipe is a little loose in the sender - is it supposed
> to be tight? Any easy repair for this? I'm wondering if I can use some
> fuel tank sealing epoxy (easiest), remove the sender and solder the pipe
> (cheapest but some work), or replace the sender ($ and not necessarily
> available...).
>
> Thanks,
> Les
> corvair at mts.net
>
>  _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are
> the property
> of the writer, please attribute properly. For help, mailto:
> vv-help at corvair.org
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options:
> http://www.vv.corvair.org/mailman/options/virtualvairs
>  _______________________________________________
>



-- 
Tom in Baltimore
www.geocities.com/hughest_tom/car_pics/