<VV> Removing door panel emblems

[J R Read_HML]

You have removed the (interior) door panel from the door?  If not, do so and 
then you will have an easy(er) time of it.  You are replacing the door 
panels and need to switch things (the chrome parts) over?

Don't worry about the old panels.  Pry (gently) the old (existing) emblems 
off carefully from the front (interior of the car) side.  If you break 
something (doubtful) I'm sure that you can find a replacement of equal or 
better quality.  Some folks GLUE the old emblems to the new interior panel. 
You did not hear that from me.

 Later, JR
CCE CORSA CORVANANTICS SCG member
'61 Rampside Standard 4/110
'65 Monza Convertible 4/140
"Keep the Love Alive"


----- Original Message ----- 
From: <WSan159401 at aol.com>
To: <virtualvairs at corvair.org>
Sent: Tuesday, July 14, 2009 1:04 AM
Subject: <VV> Removing door panel emblems


>I am replacing the door panels on my Corsa and would like to reuse the
> small emblems that are attached to the panel. I need to know how to 
> correctly
> and safely remove the fasteners from the back of the emblems. I have
> practiced  (tried) removing them by holding them with a plier and wiggling 
> in the
> past but  the studs are easily broken using this method. Is there a trick 
> or
> procedure to  successfully get the clips off the back of the emblems?
>
> Bill Sanders
> **************Summer concert season is here! Find your favorite artists on
> tour at TourTracker.com.
> (http://www.tourtracker.com/?ncid=emlcntusmusi00000006)
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________