<VV> communique improvement idea number 6

[Secular]

  I "second" idea number 6 ! especially reprinting the tech article entitled:

    Drill Bits and Rochester Carbs
    December 1990 issue - page 14 :)

  Regards,


  Tony Irani
  ----- Original Message ----- 
  From: BobHelt at aol.com 
  To: corsabod at corvair.org ; virtualvairs at corvair.org 
  Sent: Tuesday, February 17, 2009 12:02 PM
  Subject: <VV> communique improvement idea number 6


  The Tech articles and Guides are good but the  newbies need more intro and 
  simplified stuff. We need to start all  over publishing the tech info just like 
  we did back in the early days. So  why not reprint some articles that were 
  originally published years ago? In other  words, go back to square one and start 
  over with the tech info. I'm referring to  longer articles that would not be 
  candidates for the Tech Guide. But in  addition, possibly, it might be a good 
  idea to reprint Tech Guide stuff in the  Communique just to tell the newbies 
  what is in the Tech Guide. If the newbies  haven't previously seen a Tech Guide, 
  how are they going to know the actual  scope and contents? 
  Also.  Please, please let’s get rid of the rule on never reprinting the same 
  article  twice even though the two printings would be separated by 15-20 
  years.  There are many, many timeless articles that were previously printed in the  
  Communique but are not available to the current readers due to the number of  
  years that have passed. Let’s reprint some of these articles for the new  
  members.
  Regards,
  Bob  Helt