<VV> Early Brake Drums

[Ian Harding]

I know you don't care, but there is a measurement in this info, from
the 61 parts book:

DRUM ASSEMBLY, Front and Rear Wheel, Brake
60	ALL (1st design)......................	front (10 1/2
O.D.)......................	6256975	2	9.50
60-61	ALL (2nd design) (exc. F.C.)............	front (10
O.D.)........................	3789319	2	9.50

- Ian

On 2/7/09, Smitty Smith <vairologist at verizon.net> wrote:
>
>> From: rbuckridge at comcast.net
>> Subject: <VV> brake drum part number
>
>> Kelly, I show #3830094 , in group 5.809, as a 60 - 63 front brake
>> drum (exc. metallic linings).
>>  Roy - Bayshore
> --------------------------
> Smitty says:  I don't mess with part numbers much.  Usually read and measure
> and then use what works.  This thread captured ny interest though and I
> checked out what I have.  Four Early/Early brake drums in original boxes
> that I bought many years ago as supposed to be two fronts and two rears.
> (this should stir the pot).  None of them have hubs in them.  All actually
> are the 60-63 type.  Two have 6355561 on the box and the drums inside have
> 6255548 cast into them.  The other two have 6256975 on the box and 6256611
> cast into them.  Someone has written on the box next to a crossed out GM
> part number 3789319.  Hope this confuses someone else as much as it does me.
>  Only difference is, I don't care.
>  _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are
> the property
> of the writer, please attribute properly. For help,
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
>  _______________________________________________
>