<VV> Temp/Pressure light problem.

[aeroned at aol.com]

No...the circuit is completed at the sender to ground. Therefore, the wire is "hot" everywhere.

Ned 



-----Original Message-----
From: Bryan Blackwell <bryan at skiblack.com>
To: AeroNed at aol.com
Cc: VirtualVairs at corvair.org
Sent: Mon, Dec 14, 2009 7:59 pm
Subject: Re: <VV> Temp/Pressure light problem.


I read that as +12 on one terminal, and nothing on the other. That sounds the way it should be. 
 
--Bryan 
 
On Dec 14, 2009, at 8:46 PM, AeroNed at aol.com wrote: 
 
> Matt, 
> 
> You can't read Jersey? Brian said there's power to one wire at the > socket, 
> but not the other. The problem has got to be there. There's got to > be an 
> open in the socket, since the bulb is good. 
> 
> Ned (Jersey native and translator)