<VV> Weak brake action

[Ron]

Have it sleeved in brass and it will probably last forever.
RonH

----- Original Message ----- 
From: "Bryan Blackwell" <bryan at skiblack.com>
To: "Charles McKinley" <cmckinley313 at cox.net>
Cc: <virtualvairs at corvair.org>
Sent: Tuesday, December 08, 2009 10:25 AM
Subject: Re: <VV> Weak brake action


> Hi Chuck,
>
> I have tried rebuilding a couple times without success - the bore
> usually seems to get pits rather than the cups wearing out, and I
> haven't been able to get the pits removed and still have a round
> bore.  So I buy new ones, I've had good success with both master and
> wheel cylinders from the vendors.
>
> --Bryan
>
> On Dec 8, 2009, at 9:22 AM, Charles McKinley wrote:
>
>> I'm focused on the master cylinder. Here's my question: would I be OK
>> to do another rebuild of the MC (for about $30) or would it be smarter
>> to spend about $70 for a complete new MC? I'm leaning toward the
>> latter, but would like to hear your thoughts.
>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
>