<VV> 140 Crank question

[jvhroberts at aol.com]

 It's not on the flange, which is part of the cam gear, not the crank. It's on the nose of the crank, on the flat portion, right next to where the pilot bearing would be installed. 


 


John Roberts

 


 

-----Original Message-----
From: Harry  Yarnell <hyarnell1 at earthlink.net>
To: Jim Houston <jhouston001 at cfl.rr.com>
Cc: corvair <virtualvairs at skiblack.com>
Sent: Wed, Aug 12, 2009 4:04 pm
Subject: Re: <VV> 140 Crank question










I believe it's on the flange at the flywheel end.

Harry Yarnell
Perryman garage and orphanage
Perryman, MD
hyarnell1 at earthlink.net
----- Original Message ----- 
From: "Jim Houston" <jhouston001 at cfl.rr.com>
To: "Virtual Vairs" <virtualvairs at corvair.org>
Sent: Wednesday, August 12, 2009 3:58 PM
Subject: <VV> 140 Crank question


> Where do I look for the '&' mark to see if the crank is nitrided??
>
> Thanks in advance,
>
> Jim Houston
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
> 

 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are the 
property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
 _______________________________________________