<VV> Make-your-engine-fall-out bolt?

[Guy Brandes]

If you are changing the oil and filter, what's the issue with the belt??

Regards,

Guy Brandes

65 VAIR 140

CJ  Wilson 

65 '500' series 110 



PS: can anyone recommend a  good synthetic oil. I've got ZDDP to add- so

zinc content is 

a moot  point....



CJ,  Even if the rear mount has failed the oil filter location in
relation 
to the rear mounting bracket won't change.  It all moves  together.  You

should be able to clear the bottom of the filter with any  belt though
some 
"heavy duty" belts I have had took a little pulling to get out  and a
little 
pushing with the blunt tip of a prybar or a big flat tip  screwdriver to
get 
past the tight spot.  So no, you shouldn't have to  remove the filter to

change the belt.
 
For what it is worth I use Mobil I extended service oil as well as  
non-synthetic straight 30 and 40 weight HD oils rated SL--no SM oils.
 
Bob Hall
Group Corvair
 
**************Access 350+ FREE radio stations anytime from anywhere on
the 
web. Get the Radio Toolbar! 
(http://toolbar.aol.com/aolradio/download.html?ncid=emlcntusdown00000003
)
 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights
are the property
of the writer, please attribute properly. For help,
mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America,
http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options:
http://www.vv.corvair.org/mailman/options/virtualvairs 
 _______________________________________________