<VV> corvair washer pump

[ricknorris at suddenlink.net]

I believe I had that same procedure in the military once!
TLH


> Vair windshield squirts work just fine, or at least they should if 
> properly maintained.  The two biggest problems are a plugged screen in 
> that little fitting at the end of the pick up tube in the bottle, and 
> plugged nozzles.  nozzels can generally be cleared with a blast of 
> reverse flow from the air compressor, but sometimes they can be corroded 
> inside and you need to use your tip reamers from your oxy-acetelyne set 
> to clear them -- don't ream them too big, or they won't "squirt" -- just 
> clear them out.
> 
> That said, no, they don't work like the ones on a big new German car, 
> but they should squirt to the top of the windshield when parked.
> 
> Good Night --
> 
> Bill Strickland
>  _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are the property
> of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
>  _______________________________________________