<VV> Headlight switch
J R Read_HML
hmlinc at sbcglobal.net
Sat Apr 4 14:05:16 EDT 2009
I suspect that there is corrosion around the dimmer switch which is causing
increased resistance which in turn is causing the circuit breaker in the
headlight switch to trip.
Later, JR
----- Original Message -----
From: <GPARob at aol.com>
To: <virtualvairs at corvair.org>
Sent: Saturday, April 04, 2009 12:20 PM
Subject: <VV> Headlight switch
> You know, I had that problem with a replacement headlight switch in my
> early
> 73 Bronco. I made it happen by putting some great Cibie Bobis into the
> headlight buckets. The headlights worked fine on low beam, but when I
> lit up the
> extra extra bright brights, well, the stock circuit breaker couldn't take
> it. it would kick the headlights on and off every 15-30 seconds or so.
> I wonder if you've replaced your headlights with something that might
> draw
> more amperage- like some cool blue Halogens? ? ??
>
> Just a thought.
>
> Rob Neighbour
>
>
>
>
>
> **************Worried about job security? Check out the 5 safest jobs in a
> recession.
> (http://jobs.aol.com/gallery/growing-job-industries?ncid=emlcntuscare00000003)
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are
> the property
> of the writer, please attribute properly. For help,
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options:
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
More information about the VirtualVairs
mailing list