<VV> plug thread inserts

[Ron]

Aha!  Good thing I've got a good stock of the old "spring" coils as I've 
found that they work very well.
RonH

----- Original Message ----- 
From: "Bryan Blackwell" <bryan at skiblack.com>
To: "Dennis PLEAU" <ddpleau at msn.com>
Cc: "Virtual Vairs" <virtualvairs at corvair.org>; <dougmackintosh at yahoo.com>; 
"Frank DuVal" <corvairduval at cox.net>
Sent: Monday, September 22, 2008 9:19 AM
Subject: Re: <VV> plug thread inserts


> FYI, those are the new "Helicoils".  The original ones - the ones I
> think Frank refers to - really were "coils", they looked like little
> springs, and used no locking compound.  They don't sell those
> anymore, as I recall Helicoil was bought by another company and the
> other company's solid insert replaced the old coil design.
>
> --Bryan
>
> On Sep 22, 2008, at 9:16 AM, Dennis PLEAU wrote:
>
>> Helicoil spark plug inserts are solid and identical to the KD and
>> ones from NAPA.  I'm guessing helicoil makes them for everyone.
>>
>> dp
>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
>
>