<VV> Idler Pulley bolt...

[Ron]

It's simpler to use a long coupler nut in place of the standard nut.  Then 
it can be loosened with a standard open end wrench.  I have them on all of 
my Corvairs.
RonH

----- Original Message ----- 
From: "Secular" <rusecular at yahoo.com>
To: <virtualvairs at corvair.org>
Sent: Monday, September 15, 2008 2:17 PM
Subject: <VV> Idler Pulley bolt...


>
>  Hi:
>
>  Could someone kindly post the size (and length) of the longer bolt which
>  would replace the current one under the idler pulley.
>
>  I know removing the dist. cap makes loosening this bolt quite easy, I 
> also
>  have the special wrench (c3773 from Clark's).
>
>  Regards,
>
>
>  Tony Irani
>
>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
>
>