<VV> Fw: CLicking noise

[Brandes, Guy]

The key word is MIGHT and it's worth a try, it's a lot easier than
running along the side of a moving car trying to determine the source of
the noise.

Regards,

Guy Brandes

65 VAIR 140


Ooops - meant for VV as well.
Later, JR

----- Original Message ----- 
From: "J R Read_HML" <hmlinc at sbcglobal.net>
To: "Brandes, Guy" <GBrandes at loebermotors.com>
Sent: Tuesday, September 09, 2008 1:44 PM
Subject: Re: <VV> CLicking noise


> Guy,
>
> If the weight is off the noise might go away - until the car is set
back 
> down.  BUT, you are correct that an inspection needs to be made.
Looking 
> at the end caps on the U joints, the rusty looking one will be the 
> culprit.
>
> Later, JR
>
>
>
>
> Why not get it up on a hoist or jack stands and let the engine turn
over
> in gear or engine off, if it's a u-joint you should be able to hear
it.
>
> Regards,
>
> Guy Brandes
>
> 

 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights
are the property
of the writer, please attribute properly. For help,
mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America,
http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options:
http://www.vv.corvair.org/mailman/options/virtualvairs 
 _______________________________________________