<VV> Late model coil bracket

[Sethracer at aol.com]

In a message dated 9/6/2008 11:02:13 AM Pacific Daylight Time,  
dougmackintosh at yahoo.com writes:

Does the  Late model coil bracket only have one mounting hole going over the  
stud?

Thanks




The late bracket mounts down onto only one stud. The bracket is a  teardrop 
shape with both ends clamped shut together. One screw goes through  the two to 
tighten the clamp portion onto the coil. There is a small tab bent  out from 
the bracket which drops into a hole in the sheet metal when the  holes/slots 
slide over the stud. This tab keeps the bracket from rotating  radially. To 
remove the coil, you must remove the bracket from the engine, then  loosen the 
screw which clamps the bracket tight around the coil. Then the coil  will slide 
out. Assembly is reverse of that. - Seth



**************Psssst...Have you heard the news? There's a new fashion blog, 
plus the latest fall trends and hair styles at StyleList.com.      
(http://www.stylelist.com/trends?ncid=aolsty00050000000014)