<VV> Brake Adjustment

[J R Read_HML]

A '65 would have self adjusters, so if they are working properly I would be 
suspecting contamination of some sort - brake fluid, wheel grease, 
something.
Later, JR

----- Original Message ----- 
From: "David Heath" <dheath at vanceandhines.com>
To: <virtualvairs at corvair.org>
Sent: Monday, October 20, 2008 9:42 AM
Subject: <VV> Brake Adjustment


I have a brake question which I think will turn out to be an adjustment.  I
have a O65 coupe and when I use the brakes the car always pulls to one side,
just a little.  It is only on initial application of the brakes ­ once I am
on the brakes harder, the car tracks straight.  I do not have a leaking
cylinder.  Another piece information- the steering is a little loose; even
after I tightened up the adjustment screw, the steering is slightly loose
off-center.  All parts in the front end are new or rebuilt (except the
steering box).
I suspect I need to learn how to correctly adjust drum brakes.  What is the
correct way to set them up?  How much drag should they have?  I own one of
the drum brake calipers for setting the correct diameter, but frankly don¹t
know exactly how to use it; seems to be different diameters at different
places on the shoes and if I try to get it to the ³correct² diameter, the
drum won¹t go on.  What am I doing wrong?

Thanks,
Dave Heath
Cypress, CA
 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are 
the property
of the writer, please attribute properly. For help, 
mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, 
http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
 _______________________________________________