<VV> Swaybar removal

[Harry Yarnell]

Those 'inboard' straps. or links, are removed by taking out the TOP bolts. 
The straps (links) stay with the sway bar.
Or you could just pry the links open...

Harry Yarnell
Perryman garage and orphanage
Perryman, MD
hyarnell1 at earthlink.net
----- Original Message ----- 
From: "Jay Ciampi" <jciampi at embarqmail.com>
To: <virtualvairs at corvair.org>
Sent: Friday, October 17, 2008 2:24 PM
Subject: <VV> Swaybar removal


>I have a '64 Monza cpe. that I need to remove the gas tank and the swaybar 
>is in the way. The '61 TSM and the 64 TSM fail to mention how the swaybar 
>is removed and installed. I was able to remove the two end straps on the 
>bar, but the 2 straps just inboard of the strut-rods are different and even 
>after removing the bolt in the bushing location, the clamp doesn't seem to 
>"open up" to release the swaybar.
>
> HELP!
>
> Jay
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
>