<VV> No spark issue - Need Recommendation for system check

[Dennis PLEAU]

Which end of the coil wire did you ground?  

dp


> From: themoose at bellsouth.net
> To: virtualvairs at corvair.org
> Date: Mon, 13 Oct 2008 13:27:42 +0000
> Subject: <VV> No spark issue - Need Recommendation for system check
> 
> Over last weekend, I changed the oil in my 1966 110/PG.
> 
> I started the car to get the oil warmed up.  Ran just fine.
> 
> Started changing the oil.  I had read in the recent Communique "Pull the coil wire and ground it to the engine - crank the car to pump out the cooler/oil filter."  I figured I would give that a try.  Pulled coil wire - cranked car for 10 sec.
> 
> Afterward, everything seemed normal.  Dirty oil out - Clean oil in/new filter.  Reattached coil wire and tried to start car.
> 
> Not sure what happened, but car will not start now.  It just cranks.  I can smell fuel, so fuel isn't the issue.  I checked for spark, and there does not appear to be a spark.
> 
> I have tried to check everything I can, but of course, there's always something that can be missed.
> 
> WHAT DO YOU FOLKS RECOMMEND AS A CHECKLIST?
> 
> Mike in Atlanta
___________

_________________________________________________________________
See how Windows connects the people, information, and fun that are part of your life.
http://clk.atdmt.com/MRT/go/msnnkwxp1020093175mrt/direct/01/