<VV> Late Convertable Back seat

[tkalp at cox.net]

The bottom of the seat back is held in with a couple of tabs, that sometimes need to be bent.  The top of the Convert back seat back is held in by a couple of screws from the well side where the sideswrap around.  The wires should run down the driver's side rocker area.  You may have to take off the driver's side panels that cover the top mechanism to trace the wire.

Good Luck.

T. Kalp

---- RALPHSEBRELL at aol.com wrote: 
> In trying to find out why my power top wont operate, I traced it down to a  
> cut wire (the red/white trace wire) under the plug going through the "shelf" 
> and  down to who knows where. 
> I got the bench of the back seat out but the back of the seat moves  slightly 
> at the bottom but won't come lose. 
> Any suggestions from our able mechanics?
>  
> Ralph
> 65 Corsa Vert
> 
> 
> 
> **************Get trade secrets for amazing burgers. Watch "Cooking with 
> Tyler Florence" on AOL Food.      
> (http://food.aol.com/tyler-florence?video=4&?NCID=aolfod00030000000002)
>  _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are the property
> of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
>  _______________________________________________