<VV> Oil Gallery Tap & original temp sender

[Frank DuVal]

The lower oil pressure switch is shown in the cross sectional view on 
page 6A-4 of the 61 shop manual.

The lower switch location is also shown on page 6A-51 of the 61 shop 
manual ( fig 6A-101).

The oil temp switch (you learn something new every day) is shown in fig  
6A-100 on page 6A-50! It is not labled, but is clearly screwed into the 
block with the sensing part in the oil pan area.

Frank DuVal

Chris & Bill Strickland wrote:

>>Wasn't that only on the 1960's? and used for an oil TEMP probe? IIRC!
>>
>>    
>>
>Actually, most Cavecars had both an oil temp sender AND an oil pressure 
>sender on the side of the block below the dipstick port.  Both bosses 
>survived for a while in those locations, although the senders got moved 
>to more friendly environs (oil pressure) and to more critically 
>important locations (cyl head).
>
>  
>