<VV> Carb-Metering Jet Question
Matt Nall
patiomatt at aol.com
Sun May 4 21:41:11 EDT 2008
You need a diagram or at least some low pressure compressed air to help
you trace the passages... Visual is always better..
NO, the Main only work above approx. 1/3 throttle....not enough suction
to make it work.....has to RISE to the cluster and spraybars.
Idle works only when vacuum is extremely high [ closed throttle to 1/4
open....]
The Accel. pump circuit covers the area of transition....
Matt Nall
Webspace: http://members.aol.com/patiomatt
-----Original Message-----
From: Bill H. <gojoe283 at yahoo.com>
Hi all...Can anyone tell me if the main metering jet
in the 110 carburetor is used for both the idle
circuit as well as the main(cruising-high speed)
circuit?
More information about the VirtualVairs
mailing list